Atlas Copco Unloading Valve Kit Replacement – 2910363700

Atlas Copco 2910363700 – Unloading Valve Kit

The Atlas Copco 2910363700 (2910-3637-00) Unloading Valve Kit is a service kit used in the pneumatic control system of Atlas Copco rotary screw compressors. The unloading valve controls the compressor’s transition between loaded and unloaded operating conditions by regulating the control pressure associated with the inlet/unloading system.

Working Process:
During normal loaded operation, the compressor inlet system is positioned to allow the required quantity of atmospheric air into the compressor element. The unloading valve remains in the appropriate control position so that the compressor can continue producing compressed air and maintain the required system pressure.

When the compressor reaches the required discharge pressure, the compressor controller sends an unload command. The unloading valve then changes the pneumatic control pressure within the compressor control circuit. This causes the inlet/control mechanism to move toward the unloaded position, reducing or restricting the amount of air entering the compressor element.

At the same time, the compressor’s internal pressure is controlled so that the machine can continue running with significantly reduced compression load. This prevents the compressor from continuously producing compressed air when there is little or no demand from the downstream system.

When compressed-air demand increases and the discharge pressure falls below the required loading level, the controller reverses the pneumatic command. The unloading valve returns to its loading-control condition, allowing the inlet system to open and the compressor to resume normal air production.

The unloading valve therefore plays an important role in automatic load/unload control. It helps maintain stable system pressure while reducing unnecessary energy consumption during periods of low air demand.

The 2910363700 service kit is used when the internal components of the unloading valve become worn, contaminated, damaged, or unable to maintain the required pneumatic seal. Replacing the service components restores the valve’s ability to respond correctly to control-pressure changes.

A malfunctioning unloading valve can cause problems such as continuous loading, failure to unload, excessive energy consumption, slow pressure response, unstable compressor pressure, air leakage, or difficulty restarting the compressor.

During maintenance, the compressor should be isolated and depressurized before the unloading valve assembly is serviced. The valve should be inspected for contamination, damaged sealing surfaces, worn moving components, and leakage. The service components supplied in the 2910363700 kit should be installed according to the applicable Atlas Copco maintenance procedure.

After reassembly, the unloading system should be tested through complete load, unload, and restart cycles. Correct valve operation ensures that the compressor can smoothly switch between loaded and unloaded conditions.

Part Number: 2910363700
Alternative Number: 2910-3637-00 / 2910 3637 00
Part Description: Unloading Valve Kit / U/L Valve Kit
Brand: Atlas Copco
Component Type: Pneumatic compressor control-valve service kit
Typical Application: Atlas Copco GA/XA rotary screw compressors
Primary Function: Controls compressor loading and unloading
Operating Principle: Pneumatic pressure-controlled valve
Main Benefits: Supports stable pressure control, reduces unloaded power consumption, enables smooth load/unload transitions, and improves compressor reliability.

Disclaimer: All manufacturer names, trademarks, model numbers, and part numbers are used solely for identification and compatibility purposes. Our products are high-quality aftermarket replacement products and are not manufactured, sponsored, endorsed, or authorized by the original equipment manufacturer (OEM). All trademarks remain the property of their respective owners.